Free Call Australia : 1 800 834 991

Related Products

Hioki 3506 C HiTester

HIOKI 3506 C HiTester 
  • A self-calibration function minimizes variations in measurement values due to changes in ambient temperature.
  • Contact errors while measuring can be detected by the Chatter Detection function
  • Comparator function and Trigger-synchronized output function, for production line use

Product Details

HIOKI 3506 C HiTester

Source frequency 1 MHz, High-precision and ultra high speed measuring from small-value capacitance possible

Enhanced repeatability measurement accuracy, so fittest for production line. A self-calibration function minimizes variations in measurement values due to changes in ambient temperature. The cable-length-compensation function minimizes measurement errors when the measurement cable is extended. Contact errors while measuring can be detected by the Chatter Detection function. High-speed measurements in as little as 2 ms, measuring frequency of 1kHz, 1 MHz. BIN function, for easy component screening. Comparator function and Trigger-synchronized output function, for production line use.

This product is not supplised measurement probes or test fixture. Please select the measurement probe or test fixture options for your application

Basic specifications

Measurement parameters : C (Capacitance), D (loss coefficient, tan d), Q (1/tan d)

Measurement range : C: 0.001fF to 15.0000mF, D: 0.00001 to 1.99999, Q: 0.0 to 19999.9

Basic accuracy : (typical value) C: ±0.14% rdg., D: ±0.0013
Measurement accuracy = basic accuracy × B× C× D× E, B to E is coefficient

Soruce frequency : Model 3505: 1kHz, 100kHz, 1MHz, Model 3506: 1kHz, 1MHz

Measurement signal level : 500mV, 1V rms

Output resistance : 1O (@ 1kHz in 2.2mF and higher ranges; @100kHz in the 22nF and higher ranges), 20O (in ranges other than the above)

Display : LED (six digits, full scale count depends on measurement range)

Measurement time : 2ms typical (FAST mode) Actual measurement time depends on measurement configuration settings

Function : BIN (measurement values can be classified by rank), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, Current detection circuit monitoring, Applied voltage value monitoring, EXT.
I/O, RS-232C, GP-IB

Power consumption : Selectable 100, 120, 220 or 240V AC ±10%, 50/60Hz 40VA max.

Dimensions, mass : 260 mm (10.24 in) W × 100 mm (3.94 in) H × 298 mm (11.73 in) D, 4.8 kg (169.3 oz)

Supplied accessories : Power cord × 1, Spare fuse × 1

HIOKI 3532-50 LCR HiTester Increased measurement speed of up to 5msec ! 42Hz to 5MHz, wide test frequency range LCR meter High speed measurement of 5ms. High precision measurement of ...
HIOKI 3505 C HiTester Source frequency 1 MHz, High-precision and ultra high speed measuring from small-value capacitance possible Enhanced repeatability measurement accuracy, so fittes...
HIOKI 3504-50 C HiTester High-speed, Large-capacitance MLCC Inspection with Constant Voltage High speed measurement of 2ms. Supports C measurements with voltage dependency characterist...
HIOKI IM3570 Impedance Analyzer Single Device Solution for High Speed Testing and Frequency Sweeping LCR measurement, DCR measurement, sweep measurement, continuous measurement and hig...
HIOKI 3504-60 C HiTester High-speed, Large-capacitance MLCC Inspection with Constant Voltage High speed measurement of 2ms. Supports C measurements with voltage dependency characterist...